한국분석기술연구소

HOME > 마이페이지 > Q&A

Q&A

고맙습니다.
이름 : DPK \| 작성일 : 2008.07.30 11:42 \| 조회수 : 19476

바쁘신데 자료 감사합니다. 더위 건강 조심하세요. ---------------원본글입니다--------------- >>Common inorganic iodine exists as iodide (e.g. KI), iodate(e.g.KIO3), and iodine (molecular iodine, i.e. I2). In low pH (high acidity), iodide is easily oxidized to molecular iodine (I2) by dissolved oxygen. If iodide is prepared in diluted nitric acid, the oxidation is even more significant. The memory effect is seen from molecular iodine but not from iodide or iodate. The iodide and iodate would behave like other metals in terms of memory effect. In other words, if iodate is prepared either in low pH or high pH medium, no memory effect is seen. If iodide is prepared in low pH medium (pH 2 or 3, for example), memory effect is significant, but if iodide is prepared in high pH medium (pH > 8 - 9), no memory effect. Certainly, iodine (iodide, iodate, or molecular iodine) is quite different from other metals in terms of ionization potential. >> >> In addition to the memory effect when iodide is prepared in low pH medium, the more severe problem is the different sample introduction >> efficiency when iodide is introduced as a "regular" solution (as iodide ion in water) and when iodide is introduced as I2 (molecular >> iodine in water). >> This is something like a hydride generation (e.g. As as As ion in water and As as AsH3 in water). In fact, methods are available that iodide is oxidized to I2 on purpose and molecular iodine (I2) is separated from solution by using a gas-liquid parator. >> >> Using ammonium hydroxide to wash between samples would help to clean >> the residual molecular iodine (i.e. to remove memory effect), but this would not eliminate the problem caused by the different sample >> introduction efficiency when iodide is prepared in low pH medium. >> >> One way to go is to adjust sample and standard to high pH. Metals are >> precipitated at high pH (a simultaneous analysis of iodine with other >> metals probably is not likely). >> Iodide or iodate will not be Precipitated. However, the co-precipitation of iodine (iodide and iodate) with other components needs to be confirmed. >> >> - PLASMACHEM - >> ----------------------------------------------------------- >> >> 요오드 분석시 시료와 표준용액을 0.1%(w/v) tetramethyl ammonium hydroxide(TMAH) base로 준비하시면 Spray Chamber에서 I2(iodine)형성을 막는것으로 알고 있습니다. >> >> 참고하시기바랍니다. >> >> >>
IP : 210.90.31.***

바쁘신데 자료 감사합니다.

더위 건강 조심하세요.

---------------원본글입니다---------------

>>Common inorganic iodine exists as iodide (e.g. KI), iodate(e.g.KIO3), and iodine (molecular iodine, i.e. I2). In low pH (high acidity), iodide is easily oxidized to molecular iodine (I2) by dissolved oxygen. If iodide is prepared in diluted nitric acid, the oxidation is even more significant. The memory effect is seen from molecular iodine but not from iodide or iodate. The iodide and iodate would behave like other metals in terms of memory effect. In other words, if iodate is prepared either in low pH or high pH medium, no memory effect is seen. If iodide is prepared in low pH medium (pH 2 or 3, for example), memory effect is significant, but if iodide is prepared in high pH medium (pH > 8 - 9), no memory effect. Certainly, iodine (iodide, iodate, or molecular iodine) is quite different from other metals in terms of ionization potential.
>>
>> In addition to the memory effect when iodide is prepared in low pH medium, the more severe problem is the different sample introduction
>> efficiency when iodide is introduced as a "regular" solution (as iodide ion in water) and when iodide is introduced as I2 (molecular
>> iodine in water).
>> This is something like a hydride generation (e.g. As as As ion in water and As as AsH3 in water). In fact, methods are available that iodide is oxidized to I2 on purpose and molecular iodine (I2) is separated from solution by using a gas-liquid parator.
>>
>> Using ammonium hydroxide to wash between samples would help to clean
>> the residual molecular iodine (i.e. to remove memory effect), but this would not eliminate the problem caused by the different sample
>> introduction efficiency when iodide is prepared in low pH medium.
>>
>> One way to go is to adjust sample and standard to high pH. Metals are
>> precipitated at high pH (a simultaneous analysis of iodine with other
>> metals probably is not likely).
>> Iodide or iodate will not be Precipitated. However, the co-precipitation of iodine (iodide and iodate) with other components needs to be confirmed.
>>
>> - PLASMACHEM -
>> -----------------------------------------------------------
>>
>> 요오드 분석시 시료와 표준용액을 0.1%(w/v) tetramethyl ammonium hydroxide(TMAH) base로 준비하시면 Spray Chamber에서 I2(iodine)형성을 막는것으로 알고 있습니다.
>>
>> 참고하시기바랍니다.
>>
>>
>>

IP : 210.90.31.***

%s1 / %s2

프린트 글쓰기 답글 돌아가기


번호	파일	제목	이름	작성일	조회수


656		ICP-MS로 유기물 분석	master	2008.08.01	20,620
655		전처리 교육관련 다른질문 좀...ㅋ	김동진	2008.07.29	20,483
654		전처리 교육관련 다른질문 좀...ㅋ	AnApex	2008.07.29	20,868
653		바나륨	dongabcd	2008.07.29	21,154
652		바나륨	AnApex	2008.07.30	22,121
651		바나륨	dongabcd	2008.08.04	21,945
650		전처리 교육관련 질문입니다.	김동진	2008.07.28	20,150
649		전처리 교육관련 질문입니다.	AnApex	2008.07.28	20,842
648		실리콘 내 P 분석	곤이	2008.07.24	21,499
647		실리콘 내 P 분석	AnApex	2008.07.28	22,278
646		실리콘 내 P 분석	곤이	2008.07.30	22,181
645		실리콘 내 P 분석	오호동	2008.07.26	22,770
644		실리콘 내 P 분석	곤이	2008.07.28	21,436
643		실리콘 내 P 분석	오호동	2008.08.09	21,728
642		실리콘 내 P 분석	Anapex	2008.07.31	22,033
641		요오드 분석방법 문의	DPK	2008.07.23	21,601
640		요오드 분석방법 문의	AnApex	2008.07.28	20,443
		고맙습니다.	DPK	2008.07.30	19,477
638		검증된 내용들만	ㅋㅋㅋ	2008.04.01	17,636
637		안내장 부탁드립니다.	한국분석기술연구소	2008.01.18	17,836

글쓰기